A bike that begins an exciting new chapter in the Ducati story, a new “symphony” of all-Italian performance and emotion. The Panigale V4 is the first production Ducati motorcycle to mount a four-cylinder engine, derived directly from the MotoGP Desmosedici.
All you need to secure and reserve your new Ducati is a ÂŁ500 deposit, payable over the phone or in store.
We can offer you a competitive range of finance and insurance products tailored to your needs, as we are an FSA Authorised and Regulated Business and a Black Horse Approved Finance Dealer.
Desmosedici Stradale 90° V4, rearward-rotating crankshaft, 4 Desmodromically actuated valves per cylinder, liquid cooled
Bore X Stroke
81 mm x 53.5 mm
Max Power Output
157.5 kW (214 hp) @ 13,000 rpm
124.0 Nm (91.5 lb-ft) @ 10,000 rpm
Fuel Tank Capacity
6 speed with Ducati Quick Shift (DQS) up/down EVO
Tyre Size Front
Pirelli Diablo Supercorsa SP 120/70 ZR17
Tyre Size Rear
Pirelli Diablo Supercorsa SP 200/60 ZR17
Brakes Type Front
2 x 330 mm semi-floating discs, radially mounted Brembo Monobloc Stylema® (M4.30) 4-piston callipers with Bosch Cornering ABS EVO
Brakes Type Rear
245 mm disc, 2-piston calliper with Bosch Cornering ABS EVO
Offer Ends 30/09/2019
When purchasing a new MY19 Panigale V4, V4S or V4S Corse before September 30th 2019 you will receive a Ducati Corse C4 Race Suit worth £1,149.00, absolutely free of charge*.
So, not only the ultimate Superbike in the Panigale V4 but also a stunning example of the top tier, one-piece leather suits currently available.
Designed by Aldo Drudi and produced by Dainese exclusively for Ducati, the Ducati Corse C4 Race Suit is made of soft, abrasion and tear resistant D-Skin 2.0 leather, with large ventilated areas. The suit is fitted with patented Tri-Axial elasticated inserts on the back and aluminum plates built into the shoulders, elbows, and knees. The elbow and knee constructions - with interchangeable sliders - are pre-curved to accompany movements and increase riding comfort.
Book your Panigale V4 demo ride today.
Terms and Conditions
*Only applies to new Panigale V4 / V4S / V4S Corse models purchased and registered after July1st 2019. Offer ends September 30th 2019. New 2019 model year motorcycles only - excludes pre-registered, pre-owned or ex-demo bikes. Offer available whilst stocks last and may be withdrawn at any time. No cash alternative available. Not available in conjunction with any other offer or discounts. Panigale V4R excluded.
DUCATI PANIGALE V4
The Panigale V4. A bike that begins an exciting new chapter in the Ducati story, a new “symphony” of all- Italian performance and emotion. The Panigale V4 is the first mass-produced Ducati bike to mount a four- cylinder engine, derived directly from the MotoGP Desmosedici. It's a concentrate of Ducati technology, style and performance. With an engine displacement of 1,103 cm3, 214 hp and a power/weight ratio of 1.1 hp/kg, this bike sets a new standard in the supersport production bike segment.
The Panigale V4 replaces the iconic 1299 at the top of the Ducati supersport range, doing so by enhancing performance and ridability so that riders of all skill levels can enjoy boundless fun and excitement. The Panigale V4 has been developed in close collaboration with Ducati Corse, drawing directly on know-how and technology from the racing world to provide a road bike that is the closest thing possible to its MotoGP counterpart.
The outstanding performance of the Panigale V4 is underlined by a completely new design which, while it follows on from that of the supersport bikes that preceded it, now even more effectively transmits the power and essentialness of Ducati racing bikes. The Panigale V4 name combines the alluring “Panigale” tag with the “V4” designation that marks the break with the past, indicating the start of a whole new era for the Bologna-based bike manufacturer.
The Panigale V4 doesn't just set new performance standards. Thanks to the potential of the six-axis Bosch inertial platform, a latest-generation electronics package with some previously unseen features defines new active safety and dynamic vehicle control standards in all riding situations. The Panigale V4 introduces controls such as controlled drift during braking, ABS Cornering on the front wheel only thanks to a set-up specially designed for track riding and Quickshift Up & Down with a strategy that takes lean angles into account. All these controls - developed on the track together with official Ducati riders and test riders - are incorporated in the three new Riding Modes (Race, Sport and Street) and can be adjusted via the advanced TFT panel that makes the Panigale V4 the highest-tech bike in the category.
Panigale V4 S
Colourâ€¨: Ducati Red with grey frame and black wheels
Innovative Front Frame
The new ""Front Frame"", left visible for all to see, becomes an integral part of the motorcycle giving it a tight fairing, practically custom tailored. The ""Front-Frame"" transforms the Desmosedici Stradale engine into a load-bearing component. This solution represents the evolution of the Monocoque structure and was born by making use of the experience gained in MotoGP. Compared to the Monocoque, the ""Front Frame"" makes it possible to decouple the torsional and lateral stiffness so as to achieve the proper amount of pliability with respect to the stresses on the frame, better absorbing uneven road conditions in the curves and ensuring the necessary stability. All this translates into a superior agility and precision that provides the rider of the Panigale V4 with an easier and less tiring control. The main difference in the layout compared to traditional solutions is the use of the engine as a structural element for the entire frame. The ""Front Frame"" features a compact frontal structure weighing only 4 kg, secured directly to the upper semi-casing of the front bank and to the cylinder head of the V4's rear bank, the engine block also serving as a connection point for the rear suspension and pivot point for the single swinging arm. The most important advantage of the ""Front Frame"" is the use of the Desmosedici Stradale engine to achieve the desired rigidity, making it possible to significantly reduce the extension of the main frame - and therefore its weight - achieving a superior rigidity/weight ratio. To this advantage is added the fact that the reduced length of the uprights running alongside the engine has made it possible to design a compact motorcycle, especially where the rider sits. The chassis is completed by the lightweight front subframe made of magnesium and the chill-cast aluminium seat support, secured on the top to the ""Front Frame"" and at the bottom screwed onto the cylinder head of the rear bank. The rear suspension exploits levers attached to the Desmosedici Stradale engine by forged aluminium. The levers react to the movements of an aluminium cast single-sided swinging arm
Double Layer Fairing
Simplicity and integration inspired the designers for the fairing with a "double layer" solution: a main outer part with a reduced longitudinal extension, and a secondary part that functions as an air extractor for the radiator. This configuration emphasises the compactness of the mechanics and offers once again the clean lines typical of Ducati supersport bikes, which since the 916 have been distinguished by the elegance of their extended fairings.
The plasticity of the ""diamond"" tank, a Ducati trademark, assists the rider at all stages of track driving. Thanks to its muscular shape it is possible to lean completely into the most extreme corners, lower the helmet for maximum aerodynamic efficiency in the straights and offer a strong lateral grip on the knees when braking deep into corners. It extends under the seat to lower the centre of gravity, thus leaving a portion of the subtail visible.
Sleek Tail Guard
The tail guard of the single-seater version is all one piece, to emphasise the "ready-to-race" character of the bike. Its wing design is inspired by an aerodynamic spoiler and incorporates a full-LED tail light functionally divided into two parts, according to the tradition of Ducati sportbikes. The double red arch of the parking light makes the Panigale V4 unmistakable, just like its aggressive look.
For Ducati, the V4 layout at 90° is the utmost expression of sportiness for a motorcycle engine. It is no coincidence that it is the same solution used in the MotoGP Desmosedici engines. The 90° V layout of the cylinders creates a natural balancing of first-order forces without the need to resort to a balance shaft to eliminate the vibrations that notoriously entail increases in weight and power absorption. In addition to this primary benefit, which is extremely important for the reliability and mechanical efficiency of an engine that reaches rotation speeds greater than 14,000 rpm, there are others that make the configuration chosen by Ducati the most technically refined.
On street bikes the crankshaft rotates in the same direction as the wheels. In contrast, in MotoGP the counter-rotating crankshaft that rotates in the opposite direction is commonly used. The Desmosedici Stradale borrowed this technical solution from MotoGP. This innovative solution makes it possible to compensate for part of the gyroscopic effect produced by the wheels, making the bike more agile and precise when changing directions. The counter-rotating crankshaft also generates a torque due to inertia that tends to lower the front end during acceleration, and the rear end when braking, thus reducing the wheelie phenomenon.
Twin Pulse Firing Order
The crank pins, offset by 70° like on the Desmosedici GP, require a "Twin Pulse" firing order to generate power that is easy to handle and optimise traction when coming out of curves ("Big Bang" effect). Thanks to this firing order the Desmosedici Stradale makes a unique and distinctive sound.
On the Desmosedici Stradale the design of the desmodromic system is a key factor for obtaining top performance. The Desmodromic system in the Desmosedici Stradale uses components that have been completely redesigned and miniaturised to obtain very compact heads, achieving a level of sophistication, compactness and lightness never seen before on a Ducati bike. Each component of the system was designed and tested to safely reach the rotation speeds the V4 is capable of achieving. Also contributing to the compact engine heads are the new spark plugs, smaller than the standard model currently in production. The four camshafts of the Desmosedici Stradale engine move the 16 steel valves, the intake valves having a diameter of 34 mm and the exhaust valves measuring 27.5 mm in diameter, quite large in relation to the 81 mm bore adopted. The valve seats are made of sintered steel.
Given the V4's high rotation speeds and the large size of the valves, the latter could not follow the cam closure profiles using a traditional spring system. This is why the Desmodromic system becomes indispensable. In Ducati's ""Desmo"" the valves are mechanically closed with an accuracy similar to that of the opening phase, making it possible to realise more pronounced cam profiles and extreme timing that optimise the dynamic flow of fluids both during intake and exhaust and therefore greater performance of the engine. The camshafts are controlled by two “silent” timing chains. On the front timing system the chain drives the intake camshaft, which in turn transmits motion to the exhaust via a pair of gear wheels (mixed chain-gear timing system). On the rear timing system, on the other hand, the chain drives the exhaust shaft which transmits motion to the intake line. This choice minimises timing absorption, benefiting performance and reliability. The chain that controls the timing of the front cylinders is positioned on the right side of the engine and is driven by the crankshaft through a gear on the sprocket of the primary transmission. The one that drives the rear cylinders is situated on the left side of the engine and is driven by a gear that is part of the crankshaft. Each head has an ""anti-beat"" sensor that makes it possible to optimise the management of advance firing, avoiding knocking phenomena.
The new Panigale V4 is equipped with a 43 mm diameter Showa Big Piston Fork (BPF) that is fully adjustable in the compression and extension of the hydraulic brake and in the spring preload. The fork sleeve seats chromed legs to which Brembo radial brake callipers are attached. The front package is completed by the Sachs steering damper. On the back there is a fully adjustable Sachs shock absorber that on one side is attached to the Desmosedici Stradale with forged aluminium. The new Panigale V4 S and Panigale V4 Speciale are equipped with an Öhlins NIX-30 fork, Öhlins TTX36 rear shock absorber and Öhlins steering damper with event-based control system. On these versions, the suspension and the steering damper are controlled by the second-generation control system, Öhlins Smart EC 2.0, featuring, among other things, the new Objective Based Tuning Interface (OBTi).
Rims and Tyres
While the new Panigale V4 mounts 3-spoke cast aluminium rims, the new Panigale V4 S and Panigale Speciale are equipped with 3-spoke aluminium alloy rims. Ducati and Pirelli worked closely together in the development of the new Panigale V4, the first motorcycle to use the new Pirelli DIABLO™ Supercorsa SP as original equipment, 120/70 ZR17 on the front and the revolutionary 200/60 ZR 17 on the back. The latest version of the DIABLO™ Supercorsa SP in the new 200/60 ZR 17 size, already widely used as slicks in the FIM Superbike World Championship, is in fact a generational leap in the field of racing tyre replicas. The innovative profile of the new rear size maximises the footprint during the deepest corners and makes the most of the benefits of the dual mixture technology used, which on the shoulder uses the same SC2 compound as in racing slicks that can offer the grip typical of a racing tyre while still guaranteeing the robustness and versatility needed for road use. To work in full harmony with the rear tyre, even the front tyre has benefited from a major new development: all the characteristics like manoeuvrability, feedback to the rider, grip solidity, feeling of safety and predictability of grip loss have been optimised by creating a new front profile, with a slightly larger width than the previous version of the product. The redesigning of the shapes of the semi-finished products and the belting scheme has made it possible to set new benchmarks in terms of agility and manageability linked to racing peak performance. Finally, the new tread design of the DIABLO™ Supercorsa SP features a new "flash" geometry to optimise track performance by improving wear, and reduced groove widths designed to provide adequate support for the increased lateral thrusts.
New Braking System
The Panigale V4 range exclusively incorporates the brand new Brembo Stylema® monobloc callipers that represent the evolution of the already high performance M50 callipers. The new Stylema® callipers, machined from a single alloy block, have some lightened areas on the body and the fastening bushings that, compared to the M50, make them visibly more compact and allow a weight reduction of 70 g per calliper without loss of rigidity. Other evolutionary improvements have been made on the internal ventilation for greater consistency of performance. The new Stylema® callipers offer increased hydraulic performance thanks to their extreme rigidity, guaranteeing the system's quick response, reduced brake lever stroke and maximum flexibility. The Brembo double callipers each have four 30 mm diameter pistons working on 330 mm diameter discs, providing outstanding braking power, while at the rear there is a 245 mm single disc with 2-piston callipers. The braking system is supported by the ABS Cornering EVO system, which uses the lightweight 9.1MP Bosch control unit.
The proximity of the new Panigale V4 to the racing world is underlined by the lightweight 16 litre aluminium tank that, as is the case with racing bikes, has a portion of the capacity situated under the rider's seat. The space not occupied by fuel - in the front of the tank and under a cover - has been used to place all the electronics, including the battery, which in the Panigale V4 S and Panigale V4 Speciale versions are lithium-ion.
Bosch EVO ABS Cornering
The Bosch ABS system, equipped with ""Cornering"" functionality that engages the ABS even when the bike is leaning into a curve, has evolved extensively with the introduction of new intervention logic and control types. Bosch EVO ABS Cornering can be set to three different levels to fully meet track and road driving needs, even in the most critical low-grip situations. While level 3 is indicated for the road or for low-grip conditions, thereby ensuring safer and more stable braking, levels 2 and 1, which give priority to braking power, are more appropriate for racing on high-grip surfaces and racetracks. Level 2 selection makes it possible to safely slide into curves for better performance in sports riding. Level 1 of the ABS, recommended for use on the track, engages ABS only on the front brake, but maintains the ""Cornering"" feature that allows braking deep in the corners and to recover from any riding errors.
Ducati Traction Control EVO (DTC EVO)
The DTC EVO on the new Panigale V4 is based on an algorithm that makes its interventions more precise and quick. The DTC EVO interfaces with the Bosch Inertial Measurement Unit (IMU) by constantly measuring the bike's angle and using this information to better judge the actions necessary to ensure ideal slipping of the rear tyre (depending on the DTC EVO level set). Additionally, the DTC EVO provides for the intervention of throttle body valves as well as the management of advance firing and injection. In all situations where a rapid intervention of DTC EVO is not required, the use of throttle body valves makes it possible to maintain optimal combustion parameters, resulting in a more fluid intervention and response of the Desmosedici Stradale. With simple traction control, when slipping of the rear tyre is detected the system will intervene to control it. When the grip returns to optimal levels, the system reduces its engagement until the slipping occurs again. And the cycle repeats. This translates into a chart in which the intervention oscillates around a theoretical ""line of ideal intervention"" that represents the traction limit. The DTC EVO reduces the magnitude of these oscillations by orienting the system to engage near the perfect line of intervention. This kind of behaviour is particularly advantageous as it interferes minimally with the dynamic balance of the motorcycle. Furthermore, the system is designed to be more robust and consistent, making it possible to maintain a constant and predictable behaviour even when the grip changes, as in the case of rear tyre wear. In addition to the greater precision of intervention, when set to level ""1"" or ""2"", the DTC EVO adds a new function called ""spin on demand"" that allows the rider to control the bike at a level previously only achievable by expert or professional riders. Now, when the bike is cornering, the rider can use the throttle to request slippage that is greater than what is achieved with the normal level of intervention so that the motorcycle, pivoting on the front wheel, can oversteer the curve. The DTC EVO makes this possible while keeping the safety parameters under control, making it possible to oversteer with the rear wheel.
Ducati Slide Control (DSC)
The introduction of the 6D IMU has made it possible to add Ducati Slide Control (DSC) to Ducati Traction Control EVO (DTC EVO), developed in collaboration with Ducati Corse. This system supports the rider by controlling the torque delivered by the Desmosedici Stradale engine based on the slide angle. Its objective is to improve performance coming out of the corner by preventing slide angles that could otherwise be difficult to handle. The DSC works thanks to the 6D IMU that provides the vehicle dynamics control unit with information on the motorcycle's dynamics (such as lean angle, acceleration and much more). Thanks to these data and depending on the level selected by the user, DSC extends the use of the bike to all by providing improved assistance in extreme riding conditions. Like the DTC EVO, the DSC manages torque reductions by adjusting the opening of the throttle, reducing the advance firing and dropping injection rates. In all situations where a rapid intervention of DSC is not required, the use of throttle body valves makes it possible to maintain optimal combustion parameters, resulting in a more fluid intervention and response of the Desmosedici Stradale. The DSC has two levels: moving from level 1 to level 2, the system makes it possible to more easily control the values of sliding angles that are otherwise difficult to manage. It is possible to change the DSC intervention level by entering the menu, where it is also possible to set DTC EVO and DWC EVO values. It is also possible to set the direct control of the DSC using the direct access keys on the left-hand switch. The DSC's value is always visible on the instrument panel.
Ducati Quick Shift up/down (DQS EVO)
The DQS EVO with up/down function, fine tuned for the Panigale V4, compared to the previous 1299 system Panigale uses the lean angle information to maximise the motorcycle's stability during shift changes in corners. Besides minimising shift times, the DQS EVO allows downshifts without using the clutch thereby ensuring even more effective braking into corners. The system consists of a bi-directional microswitch integrated into the lever linkage that, with every change of gear, sends a signal to the Desmosedici Stradale control unit. The system acts in a different way for upshifts and downshifts, supplementing the advance firing and injection action during upshifts with the controlled opening of the throttle for downshifts, thanks to the full Ride-by-Wire system. The magnitude and duration of the various actions are designed to ensure maximum fluidity in the engagement even during extreme racing conditions, during downshifts working together with the slipper clutch and Engine Brake Control (EBC).